The accurate monitoring of the preparation process of recipes for Cosmetic sector, the repeatability, traceability and above all the safety in handling powder products are fundamental elements for an efficient preparation process, for the quality control and safety of the working environment.
LAWER supports Cosmetics Manufacturers with automatic systems for powder weighing, that remove risk factors such as weighing errors and contact with products.
All the automatic powder weighing systems offered by Lawer can grant:
- Highest quality of the finished product
- Highest weighing precision
- Replicability of the recipes
- Right balance of raw materials
- Production management, efficiency and cost reduction
- Complete confidentiality of know-how
- Optimisation of production, less production time
Lawer can supply different models of Automatic weighing systems, with Mono – Double or multi scales technology, with different level of accuracy (1g – 0.1 g or 0.01 g) and different capacity of powders’ storage (from 50 l up to 1800 l capacity each hopper).
Lawer has studied 3 different systems for the cosmetic sector, depending on the customers’ needs. For medium-large companies, Lawer proposes the SUPERCOLOR ID-TAG, while for smaller companies and laboratories, the solutions are COS-LAB and TD-MATIC, depending on the type of product that must be weighed and tested.
SUPERCOLOR ID-TAG is a fully automatic weighing system, allowing safe and clean powder recipes preparation. The system consists of a number of independent storage silos, installed in line on a modular structure. A weighing trolley incorporating the electronic scale is automatically transported to the correct silo position. Each module can accommodate up to 1O standard silos 150 l capacity or 5 double silos 300 l capacity. The silos are loaded by means of a vacuum system. The bottom section of each silo is equipped with an efficient combined screw / vibration dispensing device (Lawer patented), which allows to dispense rapidly and accurately the powder. The bucket loading / unloading takes place automatically and every bucket is identified by the ID-TAG system. At the end of each weighing cycle the data of the recipe are printed in an identification label. The system is protected by a full enclosure box, designed to connect to an external conditioning system, which ensures complete isolation of the plant, granting the ideal working conditions even in harsh environments (high humidity rate, abrupt thermal changes, air draughts, dusty ambient) and grants a safe use in case of toxic powders. An efficient suction / filtering device guarantees the maximum safety of use and a clean working environment. The system operates by means of a dedicated Lawer Software.
/ full automation of powder weighing
/ elimination of weighing errors
/ repeatability of the recipes
/ traceability of the operations
/ fast and accurate weighing
/ elimination of contaminations and pollution
/ safe and healthy working environment with no risk for the operators
/ clean working environment
/ integration with dissolving-dispensing systems
/ integration with external software systems
TD-MATIC weighs and dissolves small quantities of powder, preparing liquid solutions to be dispensed into laboratory, sampling and production machines.
/ accurate powder micro weighing
/ robotized beaker-silo handling
/ automatic recipe dissolving
/ standard laboratory solution preparation
/ automatic dispensing into laboratory, sampling or production dye machines
/ automatic beakers rinsing-drying
/ completely isolated working area by protection panels in polycarbonate
/ perfect environmental and safety conditions
COS-LAB is an automatic and compact system for the preparation of creams, used in dyeing tests on strands of synthetic or natural hair. The machine automatically performs the weighing of the powders at the tenth of a thousandth of a gram, adding distilled water, glycol and fat base mixture with maintaining the temperature, adding ammonia and finally ending with the final mixing. The glasses with the prepared creams are automatically made available to the operator in the parking lot, that accomodates up to 6 glasses.
/ accurate powder dye micro weighing
/ robotized beaker-silo handling
/ automatic dissolving
/ completely isolated working area by polycarbonate protection panels
/ perfect environmental and safety conditions
Founded in 1970, Lawer is an Italian company specialized in industrial weighing systems. It has developed advanced technologies and know-how in the automatic weighing of powder and liquid products, with single- or multi-weighing systems. Its products, solutions and services supply the food industry to increase reliability, safety, and efficiency. In more than 30.000 m2, 150 employees design, test and produce excellent systems, which are sold worldwide with the collaboration of over 50 sales agencies, installed and assisted as well as from our Italian centre, also from our after-sales offices located in China, Turkey and USA.
The key factors that have contributed to the growth of the company are related to the verticalized production process that considers every single mechanical component produced as a fundamental part for quality, to the centrality of each individual who participates in production, essential for the quality of the finished product, and to the constant investments in safety and improvement of the working environment.
